Samsung TV Input Source Not Working (Try This FIRST) [2022]

The Samsung TV source does not work for some reason. As it turns out, you’ve come to the right place!

You can learn how to fix a malfunctioning Samsung source button by following the steps in this troubleshooting tutorial.

The Samsung community is well-aware of the prevalence of these problems, so we’ve compiled a list of tried-and-true solutions for you.

When the source button seems not to recognize any inputs, there are a few things you can try.

Changing the Samsung remote’s batteries is the first thing you should do if you notice that your buttons aren’t working properly.

At see whether the remote controls are to blame, use the TV buttons to change the input. Connecting your TV to the app on your phone is another option to adjust the input settings on your TV. You may use your phone as a remote control for your TV. If you’re able to switch the TV’s inputs in any direction, your remote control may be to blame.

Resetting your TV, unplugging HDMI connections one by one, manually changing the input, and altering the settings for newer models with unique difficulties are some of the steps you may take if your Samsung TV input stops functioning, does not show up on your remote, gets stuck ,or continues to switch.

If you’re still having troubles, you may attempt a power reset on your Samsung TV.

Let’s examine how to repair your Samsung’s source button now, without further delay.

Fixing a non-functioning source button on a Samsung TV is not as simple as it seems.

When the batteries in your phone run low, you’re more likely to encounter this problem.

Problems with your remote’s fundamental functioning might arise as a result of this.

We’ll go through a few techniques you may use on your remote to correct the source button on your Samsung TV.

As long as you follow the advice of those who have had the same problem, you can’t go wrong.

Method #1 Replace Batteries

Battery depletion may compromise the operation of any button.

Changing the batteries in your Samsung remote control on a regular basis might save you lots of time while trying to figure out what’s wrong.

To check whether the problem with your Samsung TV source button not functioning has been rectified, replace the batteries first before moving on to the next step of our troubleshooting process.

Method #2 Restart Samsung TV

Restarting your Samsung TV is an excellent option.

A bad bootup is well-known to cause such problems, and restarting your TV may be the only way to fix this aggravating problem.

Even if you’ve previously restarted your Samsung TV, the problem may be more complicated than first seems.

You may power cycle your Samsung TV by following the procedures shown below.

  1. Use the remote control to turn your Samsung TV off.
  2. Unplug the TV’s power supply cable to remove the TV from electricity.
  3. Allow your television to cool for five minutes.
  4. Then reconnect the power cord to the electrical outlet

The next step is to see whether the problem remains, and if it does, you may go to the following technique.

Method #3 Factory Reset Samsung TV

If none of the preceding solutions work, a factory reset may be the best option to fix the Samsung TV source not functioning problem.

When you do a factory reset on your Samsung TV, all of your temporary settings will be returned back to how they were when the device was initially powered on.

Remember to back up any data, movies or videos that you may want to save.

If you’ve ever wondered how to conduct a factory reset on a Samsung TV, we’re here to help.

  1. Go to the General Tab in the TV’s settings.
  2. Enter your PIN after clicking Reset.
  3. Hit the OK button to complete the reset.

Note:

You must enter 0000 if you have not already entered a PIN that is necessary for confirmation during a factory reset.

Navigate to Settings and choose the support tab if the above-described methods don’t work on your TV.

The Self Diagnosis section will provide you with explicit instructions on how to execute a factory reset on your Samsung TV from there on out.

Method #4 Power Cycle Samsung Remote

Perform a power cycle on your remote if you’re experiencing problems with its operation.

It’s well-known that a good restart may help fix button issues and restore functionality.

The following instructions will help you correctly power cycle your Samsung remote:

  1. Unscrew the battery cover on your Samsung Remote.
  2. Remove the batteries from each one.
  3. For 8 seconds, press and hold the Power Button on your remote.
  4. Do not forget to replace your batteries!

Tip:

If this doesn’t work, we suggest repeatedly hitting the buttons on your remote when the batteries are dead.

As a result, you may try a different sort of power cycle to see whether the source button works.

If the problem remains after completing these easy actions, go on to the next stage in our troubleshooting process.

Method #5 CALL SAMSUNG

There should be a phone number in the instructions you may call if you run into any problems. Make a call to the number and ask for assistance if you need it. Your TV may need to be replaced or a different solution may be offered (if under warranty).

Assuming your television is still under warranty, you may be able to easily exchange it for another model without any hassle. The cost of repairing an existing TV is more than the cost of purchasing a new one. To make things even more convenient, you may just return the old one and acquire a new one.

Why Doesn’t My Samsung TV Recognize My HDMI Source?

Having an HDMI source that doesn’t function might be due to a broken port or a lack of plugs.

There are a few things you may do if your HDMI cable isn’t working, like changing the port on your TV or purchasing a new HDMI cable for the TV.

#1. Reconnect HDMI cable

In the event that your HDMI source isn’t functioning, reconnecting the HDMI cord is a simple solution.

Using this method, you’ll be able to see whether the cable has been properly plugged in and operating.

It’s sad that if the problem remains, either your HDMI cable or port isn’t functioning properly.

What to do if one of your component’s functions is broken? Keep reading to find out how.

#2. Troubleshoot HDMI Cables and Ports

If you discover that your HDMI port is faulty, we’ve provided a few troubleshooting steps for you.

Connecting HDMI sources in the inputs is your initial step.

This manner, you’ll be able to pinpoint exactly what’s wrong with your HDMI setup.

Tip:

For the greatest results from this troubleshooting procedure, we suggest power cycling the Samsung TV once more as we have already said.

Once you’ve done that for each device, check to see whether the source is active in your Settings by connecting the HDMI cable to each slot.

To find out whether the problem is with the HDMI cable or the port, do these instructions on each device.

As a last resort, we’ll go through an alternate solution for Samsung TVs that doesn’t function with HDMI sources.

#3. Replace HDMI Cable

Even though the HDMI ports appear to be functioning well, if your HDMI cable is defective, it may be necessary to replace it.

Use the preceding methods to connect an unused HDMI cable to your Samsung TV and verify that the sources listed in the TV’s menu are now working.

#4. Why can’t my Samsung TV recognize HDMI signals?

Remove the HDMI cord from your TV and the external device. If using an external device, make sure it’s securely connected before connecting it to your TV. Make an attempt using a different port on the computer if you’re still having issues. The new source must be selected.

How can I change the input source on a Samsung TV?

  • Select Source on the Circle Pad on the One.
  • Press the Enter key. You’ll be presented with a list of the various options.
  • Select the source you’d want to use.
  • To begin receiving a signal from your chosen source, just press the Apply button on your remote control.

What can I do to make my Samsung remote’s source button work again?

The remote’s back panel may be accessed by opening it.

Batteries should be removed.

For roughly 20 seconds, press any button on the remote.

Remove the old batteries and install the new ones after releasing the button.

Fix for Samsung TV Auto Switching Source

If you own a Samsung K8000 or K9000 television, you’ll be familiar with the horrible auto source switch “feature” which is imposed on all of them. Don’t be fooled by Samsung’s nonsense about an update that has yet to arrive as of the writing of this essay (on newest firmware).

So, here’s a quick rundown of the situation:

Even if the prior source had input, the TV will immediately switch to the new source whenever one of your HDMI devices is turned on. When a person turns on the DVD player to remove the disk just to make the source switch away from anything that someone was viewing, or when they turn on the computer and the TV switches to the new source, this creates so much annoyance for the user.

The only way is to use your remote and switch the source back right…no, there is a method that Samsung for several reason does not disclose, is unwilling to offer, and would rather have consumers scream about it.. The answer is right here in front of you!

Although Anynet+ is not affected, shutting off your TV will no longer automatically switch off the device and the volume will no longer be controlled by TV.

It will work if you follow the instructions exactly.

Command:

  1. Turn on the television and choose TV as the source.
  2. Don’t forget to turn off the mute! (else, nothing will happen)
  3. Enter the following commands in rapid succession using just your IR remote control. In this case, it’s 7 + 2 + 9 + Exit.
  4. A volume mute will serve as the only indicator.
  5. Now that you’ve turned a few things on and off, the TV won’t automatically switch sources!
  6. Watching television doesn’t have to be a source of irritation.

Users Experiences about Samsung TV Input Source

Took advantage of Samsung’s Hospitality / Hotel Mode and enabled HDMI Input on the TV.

I’m writing this to provide assistance to anybody else who may encounter this issue in the future.

In the hotel, I couldn’t change the TV’s input since I was staying in a non-switchable room. The model number was HG40ND477. In my hunt for answers, I came across several individuals who had removed the phone connection that was attached to a black box (often branded “On Demand”) on the back of the TV, which enables the owner to adjust the TV’s controls.

Unplugging the TV’s power cord enables the user to change the TV’s input. My issue was unique. Only a power cable and a Cable Input line were connected to the box, which was nowhere to be found. The TV has just one power button at the bottom and no input buttons. The TV is permanently mounted on the wall.

A conventional hotel remote with MENU & ORDER buttons to change the channel is all that’s included in the remote’s lack of an input command button. There is no need to use the remote control since the power button on the TV’s bottom takes care of everything. Menus may be accessed by pressing once, and then pressing and holding to pick an option.

Although I had my HDMI cable plugged in, whenever I tried to change the input, I might receive a warning on the screen that said “No device is connected.” Nothing could be done, not even by the front desk, they informed me.

A1: I came up with the solution on my own while scouring the internet for other issues. Anyway, this was a simple problem to resolve. In the absence of a TV box or phone cable, I believed that cable input was the only way that a hotel could control the TV’s volume and lock it down. I had to detach this white wire in order to remove it from the circuit. As a first step, turn off the TV and unplug this cable wire.

While this is unplugged, you can’t watch regular TV or change stations. To finish the process, unhook the TV’s power cord. (You may also try turning it off manually by pressing the tv button on the remote or the tv button on the TV itself, but I didn’t).

In some way, this restores the TV’s settings, allowing you to choose between inputs. For a few minutes, turn it off (In order to reset the TV, I turned it off for roughly five to ten minutes). Power back up and choose the input you want. So, if it worked for me, it should work for you, too. I wish you all the best with your watching!

Switching to a Samsung Smart TV that isn’t showing

Hello.

To my surprise, I just acquired a Nintendo Switch from a cousin, who had hardly played it and hadn’t even docked it once. Charging occurs, LCD shuts off, green light indication is solid green indicating that it’s sending video to the TV when docked. But despite the fact that the dock claims to show the switch, it doesn’t. “No Signal” appears on the TV screen. To date, these are the things I’ve tried:

  1. The CORRECT ORDER of the wires being plugged in
  2. Setting the console to the “hard reset” mode
  3. Resetting the AC adapter
  4. Taking the TV out of the wall and plugging it back in
  5. Switch settings: Disabling “Match TV power state
  6. use an HDMI cable and port other than the default
  7. Increasing the pixel density to 720p
  8. Changing to a different television set.
  9. RGB contrast may be altered
  10. Instead of using a power strip, plug it directly into a wall socket.
  11. Toggling the TV’s menus to disable HDMI-CEC

As for the AC Adapter, I purchased it from Amazon and the HDMI cord from Nintendo. There isn’t a single third-party item in my collection.

Because the dock claims to show to the TV and charge the console, I have little faith that it is the fault of either the console or the dock. Since the previous owner misplaced the AC adaptor before even opening the box, the console had seen very little action. Nothing has worked despite my best efforts. Please let me know if there’s anything else more I can do. Thank you very much!

A1: Try another television, if possible. This is a problem with Samsung TVs. Using a USB C to DDP to HDMI 2.0 connection, my newer device is unable to connect. Switches and docks are the most common culprits.

A2: When I received a 710D Series Samsung TV and a Nintendo Switch for Christmas, I was startled to discover that despite my best efforts, they would not function together. Even Samsung remote help couldn’t fix it, so they tried everything else before blaming it on the Switch.

There were no known compatibility difficulties, thus the support guy couldn’t explain the problem.

Other HDMI inputs work perfectly with the Samsung (Sony BluRay, Fire TV, old XBox 360 etc.)

Workaround: I have a Yamaha receiver, so I inserted it in between the gadgets (Switch HDMI -> Yamaha -> Samaung) and it worked.

There is a 3rd party dock for the Switch that I’d want to test but haven’t yet. Third-party docks have had mixed reviews, however there is some anecdotal evidence to suggest that they may transport HDMI in a slightly different manner, which might resolve the problem.

HDMI is the devil to me. ­čśÉ

You may tell me about it if you come across a better solution!

Anyone who has a newer Samsung Smart TV and sees this symbol in their Smart Hub, what does it mean for you? A similar effect may be achieved with the renaming of an input to “XBOX One.”

NINTENDO SWITCH Issue

A1: Unplug the HDMI cable from the TV while the Switch is running.

Turn off the TV and disconnect all of the electrical devices in the room.

Remove the dock from the Switch.

Re-energize the Switch dock and TV (without the console).

Restart the television.

Reconnect the HDMI cable.

Place the Switch on the dock with the screen turned on.

The Switch will be recognized by the TV, which will display the logo in the inputs menu. Hopefully it will benefit you as it helped me.

Conclusion

As a result, we hope that you now have a better understanding of how to solve the Samsung TV source not functioning problem.

The customer care staff may be contacted if the information in this article isn’t sufficient.

Our blog is a great place to go if you’re experiencing any additional troubles with your Samsung TV.

Leave a Comment